7-5
5 Press the [1] key (OFF).
AUTO PRE FEED setting screen is displayed.
Supplement
It will return to MEDIA SETTING screen (2/3)
without changing the settings when you press
the POSITION (
) key (PREVIOUS).
6 Press the [1] key (ON) or the [2] key (OFF).
AUTO PRE FEED is selected and return to AUTO PRE FEED screen.
7 Press the [2] key (FEED LENGTH).
FEED LENGTH setting screen is displayed.
Supplement
Feed length can be set in 0.1 m units.
Setting range is 0.5 m to 50.0 m.
Press the FAST key to change the setting
digits.
8 Press the POSITION ( ) key and increase or decrease the
setting value.
9 Confirm the setting value, and press the POSITION ( ) key
(CANCEL).
FEED LENGTH is selected and return to AUTO PRE FEED screen.
Supplement
It will return to MEDIA SETTING screen (2/3)
without changing the settings when you press
the POSITION (
) key (CANCEL).
10 Confirm the setting and press the [ENTER] key.
Setting will be set, and it will return to MEDIA SETTING screen (2/3).
Supplement
When setting the auto media feed, the [PreFEED]
sign will appear on the right side of the screen.
See "How to Use Control Panel
P. 2-21
.
11 Press the [PAUSE/MENU] key.
It will return to default screen.
To Next Page
Loading...
