4-17
3 Press the POSITION ( ) key
MEDIA SETTING screen (3/3) is displayed.
4 Press the [3] key (PANEL CUTTING).
PANEL CUTTING screen is displayed.
5 Press the [1] key (OFF).
PANEL CUTTING setting screen is displayed.
6 Press the [1] key (ON), or the [2] key (OFF).
Confirm the settings and return to the PANEL CUTTING screen.
Supplement
Press the [FAST] key to change the setting
digits.
The partition length can be set from 1.0 to
2000.0 cm.
7 Press the [2] key (DIVIDE LENGHT).
DIVIDE LENGHT setting screen is displayed.
8 Press the POSITION ( ) key and increase or decrease the
setting value.
Supplement
It will return to MEDIA SETTING screen (3/3)
without changing the settings when you press
the POSITION (
) key (CANCEL).
9 Confirm the setting and press the [ENTER] key (SET).
Confirm the settings and return to the MEDIA SETTING screen (3/3).
10 Press the [PAUSE/MENU] key.
It will return to default screen.
To Next Page
Loading...
