GRAPHTEC CE6000-120AP - Page 130

6-11
6 Confirm the setting value, and press the POSITION ( ) key
(PREVIOUS).
X DISTANCE ADJUST will be set, and it will return to DISTANCE
ADJUST screen.
7 Press the [2] key (Y).
Y DISTANCE ADJUST setting screen is displayed.
Supplement
Setting range for adjustment value is -2.00%
to +2.00%.
Press the [FAST] key to change the setting
digits.
8 Press the POSITION ( ) key and increase or decrease the
Y DISTANCE ADJUST value.
9 Confirm the setting value, and press the POSITION ( ) key
(PREVIOUS).
Y DISTANCE ADJUST will be set, and it will return to DISTANCE
ADJUST setting screen.
Supplement
It will return to AREA PARAMETERS screen
(1/1) without changing the settings when you
press the POSITION (
) key (CANCEL).
10 Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to AREA PARAMETERS screen (1/1).
11 Press the [PAUSE/MENU] key.
It will return to default screen.