8-6
Supplement
Match the setting value of the application to be
used.
6 Press the POSITION ( ) key and increase or decrease the
setting value.
7 Confirm the setting and press the POSITION ( ) key
(PREVIOUS).
BAUD RATE will be set, and it will return to RS-232C setting screen.
8 Press the [2] key (DATA BIT).
DATA BIT setting screen is displayed.
Supplement
Match the setting value of the application to
be used.
It will return to RS-232C setting screen
without changing the settings when you
press POSITION (
) key (PREVIOUS).
9 Press the [1] key (8 BIT) or the [2] key (7 BIT).
DATA BIT will be set, and it will return to RS-232C setting screen.
10 Press the [3] key (PARITY).
PARITY setting screen is displayed.
Supplement
Match the setting value of the application to
be used.
It will return to RS-232C setting screen
without changing the settings when you
press POSITION (
) key (PREVIOUS).
11 Press the [1] key (NONE), [2] key (EVEN), or the [3] key (ODD).
PARITY will be set, and it will return to RS-232C setting screen.
12 Press the [4] key (HANDSHAKE).
HANDSHAKE setting screen is displayed.
To Next Page
Loading...
