12-20
CAUTION
Do not place your hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
7 Confirm that operation area of tool and media is safe.
Supplement
Press [2] key (CANCEL) to return to the TEST
screen without outputting the CUT DEMO.
8 Press [1] key (DONE).
CUT DEMO is started.
Supplement
During operation, the keys on the control panel
do not work. When the CUT DEMO output is
finished, they are active.
9 When you start a cutting, TEST screen (1/2) is displayed.
10 Press the [PAUSE/MENU] key.
It will return to default screen.
To Next Page
Loading...
