2-8
Determine the desired position, and then tighten the flange screw.
Set the position measurement for the media flange as per the
following guidelines in when using paper with a width of 1200 mm.
If using paper of a different width loosens the flange screw, adjust
the position of the grit roller, then re-tighten the flange screw.
Groove
Flange
screw
Media flange
Media
Approx. 100 mm
Grooved portion of the components should
be set so that the grooves contact the
receiving end of the roller.
Stock shaft
2 Lowering the lever releases the stopper lock.
Lever
3 Set the stock shaft in from the front.
To Next Page
Loading...
