GRAPHTEC FC8000-75 - List of Tools; Tools; Greasing and Gluing Points

FC8000-UM-251-9370 5-1
5. LIST OF TOOLS
5. LIST OF TOOLS
5.1 Tools
No. AdjustmentItem Jig Tool
1 Penforceadjustment CutterPenHolder(CB09) Colexgauge(50,300,500gf)
2 Distanceadjustment Glassscale
3 Penblockheightadjustment 10mmheightblock
4 Firmwareupdate PC,USBI/Fcable
5 X-drivebelttensionadjustment Push-pullgauge(2kg)
6 Y-drivebelttensionadjustment Push-pullgauge(2kg)
7 Replacingthemainboard
Screwdriver
8 Replacingthevacuumfan
5.2 Greasing And Gluing Points
No. GreaseorGluePoint GreaseorGluename Applicationquantity
1 Cam ShinetusilicongreaseG501 Suitablequantity
2 X-drivemotorpulley ShinetusilicongreaseG501 Suitablequantity
3 Y-drivemotorpulley ShinetusilicongreaseG501 Suitablequantity
4 X-drivepulley ShinetusilicongreaseG501 Suitablequantity
5 Y-drivepulley ShinetusilicongreaseG501 Suitablequantity
6 Y-tensionpulley ShinetusilicongreaseG501 Suitablequantity
7 Y-rail,pinchrollerassyslidingarea ShinetusilicongreaseG501 Suitablequantity
8 Y-motordrivepulleysetscrews Loctite222 Smallquantity
9 X-motordrivepulleysetscrews Loctite222 Smallquantity
10 X-drivepulleysetscrews Loctite222 Smallquantity