GRAPHTEC FC8000-75 - 7. Adjustments; 7.1 List of Items Requiring Readjustment

FC8000-UM-251-9370 7-1
7. ADJUSTMENT
7. ADJUSTMENTS
7.1 List of Items Requiring Readjustment
Ifyoureplacedanyoftheunitslistedinthetablebeloworalteredtheirsensorpositions,besuretoreadjust
thecorrespondingitems.
 Unitname
 Item
Mainboard
Light
pointer
Penblock
Pinchroller
sensor
X,Ymotor Driveroller
X,YMotor
drivebelt
Auto
registration
mark
sensor
NOV-RAMclear M
Penforceadjustment M M
Distanceadjustment M M M
Autoregistrationmarksensor
adjustment
N N N M
Lightpointeradjustment N M N
Firmwareupgrade M
Belttensionadjustment M M M
Pinchrollerpressureadjustment M
2-Penoptionadjustment N N
DIPswitchsetting N
Servogainadjustment N N
Nomark:Unnecessary M:Mustalwaysbeadjusted N:Tobeadjustedasnecessary
Note: Themainboardmusthavethelatestversionofrmwareunlessotherwisespecied.