GRAPHTEC FC8000-75 - How to Replace the Control Panel Assembly

FC8000-UM-251-9370 6-3
6. DISASSEMBLY AND REASSEMBLY
6.1.3 How to Replace the Control Panel Assembly
How to detach the control panel assembly
(1) Detachtherightsidecover(seeSubsection6.1.1).
(2) RemovethethreeM3L6bindingheadscrewsholdingthecontrolpanelassemblyfromthetopofthe
centercover.
M3L6bindingheadscrew
Controlpanelassembly
(3) Disconnectthetwoexiblecablesfromthecontrolpanelboard.
Controlpanelboard
Flexiblecable
How to reinstall the control panel assembly
(1) Reattachthecontrolpanelassemblyinthereverseorderinwhichitwasdetached.