GRAPHTEC FC8000-75 - How to Replace the Cutting Mat

FC8000-UM-251-9370 6-27
6. DISASSEMBLY AND REASSEMBLY
6.2.15 How to Replace the Cutting Mat
How to detach the cutting mat
(1) Peeloffthecuttingmatfromthecuttingmatbase.
How to reinstall the cutting mat
(1) Cleanthesurfaceofthecuttingmatbasewithalcoholwherethecuttingmatwasattached.
(2) Attachthenewcuttingmattothecuttingmatbase.
(3) Makesurethatthereisnoairbetweenthecuttingmatandthecuttingmatbase.