GRAPHTEC FC8000-75 - Page 58

FC8000-UM-251-9370 6-26
6. DISASSEMBLY AND REASSEMBLY
How to reinstall the drive roller
(1) Reattachinthereverseorderinwhichitwasdetached.
(2) SpreadasuitablequantityofLoctite222onthetwoM3L4WPsetscrewsholdingtheX-drivepulley.
(3) PerformtheX-drivebelttensionadjustment.(seeSubsection7.2.3).
(4) SpreadasuitablequantityoftheShinetusilicongreaseG501ontheX-motorpulley.
(5) MovetheX-drivepulleyandcheckthetensionoftheX-drivebelt.
(6) Reattachtheotherpartsinthereverseorderinwhichtheyweredetached.