GRAPHTEC FC8000-75 - Page 89

FC8000-UM-251-9370 7-29
7. ADJUSTMENT
(9) PresstheENTERkeywhenthegapbecameto1.1mm.
Thisgapshouldbe1.1mm.
(10)Mountabertippeninthe2ndpenstation.
(11)PresstheF4keytoconrmthatthepenexchangingisperformedcorrectly.
(12)Ifthepenexchangingisperformedcorrectly,presstheENTERkeytostorethesettingandcompletethe
adjustment.