GRAPHTEC FC8000 Series - Page 109

5-8
5-9
Alignment registration mark
A function to continuously cut the print with same design aligned, using a plugin for the Illustrator. It is
appropriate for cutting multiple numbers of stickers or similar.
Supplement
It cannot be set on the plotter.
Setting is only possible from the Cutting Master
2.
l
l
Feed direction of media
Next page
Operation
1
Press the [MENU] key.
MENU screen is displayed.
2
Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3
Press the [3] key (MARK SCAN MODE).
MARK SCAN MODE screen is displayed.