GRAPHTEC FC8000 Series - Page 224

13-10
13-11
Symptom LCD Display Possible Cause Solution
E04022 There was cancel operation by the
user.
Redo the process.
E04023 Registration mark was not
detected.
Redo the sensor level adjustment.
Change the color of the
registration mark.
Check the media.
Check the print position of the
registration mark.
E04024 Registration mark was not
detected.
Redo the sensor level adjustment.
Change the color of the
registration mark.
Check the media.
Check the print position of the
registration mark.
E04025 Registration mark was not
detected.
Redo the sensor level adjustment.
Change the color of the
registration mark.
Check the media.
Check the print position of the
registration mark.