2-37
Next page
3
Press the [CONDITION] key in the default screen.
CONDITION screen (1/3) is displayed.
4
Press the POSITION (
▲
) key.
CONDITION setting screen (3/3) is displayed.
5
Press the [4] key (BLADE ADJUST).
Message prompting to turn the blade-length adjustment knob is displayed.
Supplement
See "Structure of Cutter Pen"
P.2-2
for blade-
length adjustment knob.
6
As instructed, turn the blade length adjustment knob to the left
to fully retract the blade.
Blade
7
Press the [ENTER] key.
BLADE ADJUST screen is displayed.
To Next Page
Loading...
