GRAPHTEC FC8600 SERIES - Setting Speed of the Registration Mark Scan (NORMAL;ISM)

5-26
5-27
Setting Speed of the Registration Mark Scan ("NORMAL"/"ISM")
Speed of the tool carriage and media to scan the registration mark is set.
It is set to "NORMAL" for normal use. The following media may not be read even if it is set to "NORMAL". Set the
setting to "ISM" to improve the condition in that case.
•
The surface laminated media
•
The hairline finished media
•
The colored or glossy media
*
ISM (Intelligent Scan Mode) is a function to improve the registration mark scanning accuracy.
Operation
1
Press the [MENU] key.
MENU screen is displayed.
2
Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3
Press the POSITION (
▲
) key.
POSITION
ARMS SETTING screen (4/4) is displayed.
4
Press the [2] key (SENSING SPEED).
SENSING SPEED adjusting screen is displayed.
5
Press the [1] key (ISM) or the [2] key(NORMAL).
Supplement
It will return to ARMS setting screen (4/4) without
changing the settings when you press the
POSITION (
◄
) key (CANCEL).
6
Confirm the setting and press the [ENTER] key (SET)
Setting will be set, and it will return to ARMS setting screen (4/4).
7
Press the [MENU] key.
It will return to default screen.