v
After Turning on the Plotter
During the course of turning on the plotter, be sure to observe the following precautions. The tool carriage and
loaded media may suddenly move during the cutting operation, immediately afterward and when setting the
plotter's functions. Keep hands, hair, clothing and other objects out of the vicinity of the tool carriage, grit roll-
ers and loaded media. To prevent operator injury and poor cutting results, be careful not to allow hands, hair,
clothing or other foreign objects to become entangled with the tool carriage or loaded media while the plotter is
operating.
Machine Caution Label
Following warning labels are applied on the machine. Be sure to observe all the cautions on the label.
Notes on the Stand
Be sure to use only the stand designed for the FC8600 Series with your FC8600 Series plotter. The use of a
different stand may cause a plotter malfunction or bodily injury.
To Next Page
Loading...
