GRAPHTEC FC8600 SERIES - Manually Adjusting the Sensor Level (Threshold Value) (When the SENSING SPEED Is Set to ISM)

5-22
5-23
Manually Adjusting the Sensor Level (Threshold Value) (When the
SENSING SPEED is set to "ISM")
The sensing level (threshold value between the media background color and registration mark) to detect the
registration mark can also be manually set. The sensor is adjusted to read the registration mark printed with
black lines on a white background as the default condition. The sensing level of the sensor may need to be
adjusted for registration marks printed in color and the finish (gloss/matte) of the media.
The sensing level can be adjusted automatically. Please refer to the "Adjusting the Sensor Level"
P.5-18
.
Next page
Operation
1
Press the [MENU] key.
MENU screen is displayed.
2
Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3
Press the POSITION (
▲
) key.
POSITION
ARMS setting screen (4/4) is displayed.
Supplement
It will return to ARMS setting screen (4/4)
without changing the settings when you press
the POSITION (
◄
) key (CANCEL).
The sensing level will define the threshold to
detect the registration marks. The threshold can
be adjusted from a preset value.
The X column sets the level to detect the
registration mark when moving in the X
direction. The C column sets the level for the
Y direction. It is the ratio to the value for the X
direction.
l
l
l
4
Press the [3] key (SENSING LEVEL).
SENSING LEVEL adjusting screen is displayed.