GRAPHTEC FC8600 SERIES - Pre Feed of Media (Paper or Marking Film)

2-22
2
-
2-23
Pre Feed of Media (Paper or
Marking Film)
8
The PRE FEED function is used to prevent the loaded media from slipping by automatically advancing
the media the specified length and imprinting it with grit roller marks. This function can also be used to
acclimate long media lengths to the operating environment in order to minimize media expansion and
contraction, and to ensure stable media feed operations.
P.8-4
Perform Automatic Pre Feed When Cut Data is Received
P.8-6
Perform Automatic Pre Feed When Media is Set (Initial Feed)
P.8-7
Setting Feed Speed for the Pre Feed
Operation
1
Press the [MENU] key in READY status.
MENU screen is displayed.
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/3) is displayed.
Supplement
It will return to MEDIA setting screen (1/3)
without changing the settings when you press the
POSITION (
◄
) key (CANCEL).
3
Press the [1] key (PRE FEED).
FEED LENGTH setting screen is displayed.
4
Press the POSITION (
▲▼
) key and increase or decrease the
setting value.
POSITION
5
Confirm the setting and press the [ENTER] key.
Pre feed will start, and it will return to MEDIA setting screen (1/3).
6
Press the [MENU] key.
It will return to default screen.