GRAPHTEC FC8600 SERIES - Other Error Messages

13-12
13-13
Other Error Messages
Symptom LCD Display Possible Cause Solution
E01001~
E01005
The plotter is defective. Contact your sales representative
or the Graphtec call center.
E01006 The plotter is defective. Contact your sales representative
or the Graphtec call center.
E01007 The plotter is defective. Contact your sales representative
or the Graphtec call center.
E01008 The plotter is defective. Contact your sales representative
or the Graphtec call center.
E01009 The plotter is defective. Contact your sales representative
or the Graphtec call center.
E01010 The plotter is defective. Contact your sales representative
or the Graphtec call center.
E01011 The plotter is defective. Contact your sales representative
or the Graphtec call center.
E01012 The plotter is defective. Contact your sales representative
or the Graphtec call center.
E01013 The plotter is defective. Contact your sales representative
or the Graphtec call center.
E01014 The plotter is defective. Contact your sales representative
or the Graphtec call center.