GRAPHTEC FC8600 SERIES - Hold-Down Force Assignments

2-14
2-15
Hold-down Force Assignments
Use the Strong or Medium setting for the push rollers used to hold down the edges of the media. Always use
the lower setting for the push roller(s) between the two outside rollers.
When two push rollers are used
Strong
OK
NG
Strong Medium Medium
Strong Medium Medium Low
Low Low
Strong Low
For right and left
vice versa too
When three push rollers are used
Strong
OK
NG
Medium
All others
Strong Medium Medium Medium Medium Low Medium
When four push rollers are used
Medium
OK
NG
Medium
All others
Medium Medium Strong Medium Medium Strong
Medium Low Low Medium