GRAPHTEC FC8600 SERIES - Supplies

15-8
15
-
15-9
4
Supplies
Item Model Contents
Cutter plunger PHP33-CB09N-HS Used with
Ф
0.9 mm diameter cutter blades
PHP33-CB15N-HS Used with
Ф
1.5 mm diameter cutter blades
PHP35-CB09-HS Used with
Ф
0.9 mm diameter cutter blades
PHP35-CB15-HS Used with
Ф
1.5 mm diameter cutter blades
Water-based fibertip pen KF700-BK With 10 black water-based fibertip pens
KF700-RD With 10 red water-based fibertip pens
KF700-BL With 10 blue water-based fibertip pens
Water-based fibertip pen plunger PHP31-FIBER Water-based fibertip pen plunger (set of 1)
Oil-based ballpoint pen KB700-BK With 10 black water-based fibertip pens
Oil-based ballpoint pen plunger PHP34-BALL Oil-based ballpoint pen plunger (set of 1)
Cross cut blade CT01H
CT02U Ultra-hard blade
Pouncing tool PPA33-TP12 1.2 mm diameter, plunger, pin (set of 1)
RS-232C (for DOS/V equipment, 3 m) CB0023C-HS RS-232C cable (universal) 1
Refer to the Cutter Blade Manual for the cutter blade.
Information on our latest supplies is available on the Graphtec homepage.