GRAPHTEC FC8600 SERIES - Setting the Display Length Unit (LENGTH UNIT)

10-2
10-3
Setting the Display Length Unit (LENGTH UNIT)
This function enables you to set the unit for coordinates appearing on the display panel to either meter or inch
units.
Operation
1
Press the [MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION (
▼
) key (ADV.).
POSITION
ADVANCE setting screen (1/3) is displayed.
3
Press the [3] key (LENGTH UNIT).
LENGTH UNIT setting screen is displayed.
4
Press the [1] key (METRIC) or the [2] key (INCH).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen (1/3).
6
Press the [MENU] key.
It will return to the default screen.