GRAPHTEC FC8600 SERIES - Enabling;Disabling the Beep Setting (BEEP for KEY OPERATION)

10-6
10-7
Enabling/Disabling the Beep Setting (BEEP FOR KEY OPERATION)
This function selects whether to enable or disable the beep that is emitted whenever a control panel key is
pressed.
Operation
1
Press the [MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION (
▼
) key (ADV.).
POSITION
ADVANCE setting screen (1/3) is displayed.
3
Press the POSITION (
▼
) key.
POSITION
ADVANCE setting screen (2/3) is displayed.
4
Press the [3] key (BEEP FOR KEY OPE.).
BEEP FOR KEY OPE. setting screen is displayed.
5
Press the [1] key (ON) or the [2] key (OFF).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen (2/3).
7
Press the [MENU] key.
It will return to default screen.