13-15
Caution Message
Symptom LCD Display Description
W06001 Cross cut function cannot be used for sheet media.
W06002 Cross cut function cannot be used because the media is loaded from
the front.
W06003 Cross cut function cannot be used until the media size is detected.
W06004 Cross cut function cannot be used when the push roller sensor is
disabled.
W06005 Cross cut function cannot be used when the media sensor is disabled.
W06007 CONDITION No. that has selected pouncing tool as the tool number
setting can only set TOOL 1.
W06008 When command is set to auto, the DUMP mode is not available.
W06009 When panel cutting is on, copy cannot be changed.
W06010 When the rotation is set to on, data including registration mark scan
data cannot be copied.
W06011 When the mirror is set to on, data including registration mark scan
data cannot be copied.
W06012 This operation cannot be used when the Cut by Segmented
Registration function is used.
To Next Page
Loading...
