GRAPHTEC FC8600 SERIES - Setting of Step Movement Distance

3-4
3-5
Setting of Step Movement Distance
Operation
1
Press the [MENU] key.
MENU screen is displayed.
2
Press the POSITION (
▼
) key (ADV).
POSITION
ADV. setting screen (1/3) is displayed.
3
Press the [1] key (MOVE STEP).
MOVE STEP screen is displayed.
Supplement
Value chosen here will be the movement distance
for the step movement.
4
Press the [1] key (1.0mm) or the [2] key (0.1mm).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to DEFAULT setting screen (1/3).
Supplement
It will return to DEFAULT setting screen (1/3)
without changing the settings when you press the
POSITION (
◄
) key (CANCEL).
6
Press the [MENU] key.
It will return to default screen.