GRAPHTEC FC8600 SERIES - Enabling;Disabling the Pen Select Command (PEN SELECT)

11-4
11-5
Enabling/Disabling the Pen Select Command (PEN SELECT)
Setting for what to do when the pen select command ("J" in GP-GL, and "SP" in HP-GL) is received. It will ignore
the pen select command when set to DISABLED.
Operation
1
Press the [MENU] key in the default screen.
MENU screen is displayed.
2
Press the [1] key (TOOL).
TOOLS SETTING screen (1/3) is displayed.
3
Press the POSITION (
▲
) key.
POSITION
TOOLS SETTING screen (3/3) is displayed.
5
Press the [1] key (TOOL SELECT COMMAND).
TOOL SELECT COMMAND setting screen is displayed.
6
Press the [1] key (ENABLED) or the [2] key (DISABLED).
Supplement
It will return to TOOLS SETTING screen (3/3)
without changing the settings when you press the
POSITION (
◄
) key (CANCEL).
7
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to TOOLS SETTING screen (3/3).
8
Press the [MENU] key.
It will return to default screen.