GRAPHTEC FC8600 SERIES - Page 176

7-18 7-19
4
Press the [2] key (INITIAL BLADE).
INITIAL BLADE setting screen is displayed.
5
Press the [1] key (OUTSIDE) or the [2] key (2mm BELOW).
Supplement
It will return to TOOLS SETTING screen (3/3)
without changing the settings when you press the
POSITION (
◄
) key (CANCEL).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to TOOLS SETTING screen (3/3).
7
Press the [MENU] key.
It will return to default screen.