GRAPHTEC FC8600 SERIES - Page 182

8-2 8-3
4
Press the [2] key (DATA SORTING).
DATA SORTING setting screen is displayed.
5
Press the [1] key (AREA).
AREA SORTING setting screen is displayed.
6
Press the [1] key (ON) or the [2] key (OFF).
AREA SORTING is selected and return to DATA SORTING screen.
7
Press the [2] key (TOOL).
TOOL SORTING setting screen is displayed.
8
Press the [1] key (ON) or the [2] key (OFF).
TOOL SORTING is selected and return to DATA SORTING screen.
Supplement
It will return to TOOLS SETTING screen (2/3)
without changing the settings when you press the
POSITION (
◄
) key (PREVIOUS).
9
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to TOOLS SETTING screen (2/3).
Supplement
[S] mark is displayed at the right of the screen
when SORT MODE is set. See "How to Use
Control Panel"
P.2-17
.
10
Press the [MENU] key.
It will return to default screen.