1-11
3
Connect the basket tubes (short) to the joints inserted on the
basket tubes (long) at the end of the basket attached in step 1.
Mounting position of the center basket pipe (long) depends on
the loading direction.
Insert two bascket tubes (long) into the attachment ditches on
the front.
Basket tube (long)
Cloth basket
Joint
For front
loading
For rear
loading
4
Fix the part assembled in 3 to the stand (Under a Media stocker)
using the socket head cap screws (x 2) . Assembly is completed
by separating basket to front and back of the center bar.
Socket head
cap screw
Socket head
cap screw
Center bar
Stand
To Next Page
Loading...
