14-4
14-5
7
Press the [3] key (WIDTH).
WIDTH setting screen is displayed.
* Display may vary depending on the selected tool condition number.
Supplement
It will return to CONDITION screen (1/3) without
changing the settings when you press the
POSITION (
◄
) key (CANCEL).
8
Press the POSITION (
▲▼
) key and increase or decrease the
setting value.
9
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to CONDITION screen (1/3).
10
Press the [CONDITION] key.
It will return to default screen.
Supplement
Setting range is between 1.0 and 99.0 mm.
To Next Page
Loading...
