HBM WE2107 - Start Hard Copy Via Second Serial Link

WE2107 - Communication commands
104
I1820-1.3 enHBM
Start hard copy
(Start hard copy via second serial link)
Property Content Note
Command string SHC
No. of parameters
Parameter range
Factory default
Reaction time < 15 ms
Password protection No
Relevant to legal for
trade
No
Parameter backup No
Input Master SHC; No response
Note: ( ) required parameters, < > optional parameters for parameter input
Function:
If a printer is connected to the second serial link and the UART2 is activated for the print
function in the parameter menu than this command can start a hard copy of the different print
protocols (see command PRT
).
If legal for trade is set (LFT>0) than the hard copy will only perform if stand still condition
occurs. If no stand still condition occurs during 5 sec. ,than the SHC demand will be deleted.
If it is a non legal for trade application is set (LFT=0) the stand still condition is not necessary.
SHC