WE2107 - Communication commands
4
I1820-1.3 enHBM
Safety information
See operating instructions Part 1
All the factory settings are stored at the factory so that they are safe from power failure and
cannot be deleted or overwritten. They can be reset at any time by using the command TDD0.
For more information, see "Individual Command Descriptions".
The factory set production number must not be changed.
Residual risks are indicated in these mounting instructions by the following symbols:
Symbol:
CAUTION
Meaning: Possible dangerous situation
Warns of a potentially dangerous situation in which failure to comply with safety requirements
could result in damage to property or some form of physical injury.
Symbols for operating instructions and useful information:
Symbol:
NOTE
Means that important information about the product or its handling is being given.
To Next Page
Loading...
