WE2107 - Communication commands
66
I1820-1.3 enHBM
Clear Dead Load
(Set to zero)
Property Content Note
Command string CDL
No. of parameters ‐
Parameter range ‐
Factory default ‐
Reaction time 1/ output rate
Password protection No
Relevant to legal for
trade
no
Parameter backup No data to back up
Input Master CDL; No response
Note: ( ) required parameters, < > optional parameters for parameter input
Function:
The command CDL; undertakes a zero balance of the gross value if this is in the range
"2 % (or "20 % with LFT=0 respectively) of the weighing range (NOV) and there is
standstill. Set to zero is not executed if one of the two conditions is violated.
Once set to zero is successfully completed, the display is switched to gross output (TAS=1).
A CDL?; query is not permitted.
CDL
To Next Page
Loading...
