HBM WE2107 - Calibration Weight

41
WE2107 - Communication commands
I1820-1.3 en HBM
Calibration Weight
(Calibration weight)
Property Content Note
Command string CWT
No. of parameters 1
Parameter range P1=10000...120000 (10%...120%) 100000 = 100%
Factory default 100000 =100%
Reaction time <15 ms
Password protection YES
Relevant to legal for
trade
YES
Parameter backup With command TDD1;
Input Master CWT(P1); No response
Query Master CWT?;
Response WE P1crlf P1 = 6 characters
Note: ( ) required parameters, < > optional parameters for parameter input
Function:
If, when adjusting the user curve, you cannot apply 100 % of the input signal, then the CWT
command also gives you the opportunity to adjust the WE with an input signal in the range
10 % to 120 % of the required nominal (rated) value (partial load calibration).
CWT