HBM WE2107 - Identification of Electronic Type and Serial Number

75
WE2107 - Communication commands
I1820-1.3 en HBM
Identification
(Identification of electronic type and serial number)
Property Content Note
Command string IDN?
No. of parameters ‐
Parameter range ‐
Factory default WE2107,xxxxxxx,P7y crlf Response to IDN?;
Reaction time < 15 ms
Password protection No
Relevant to legal for
trade
No
Parameter backup ‐
Input Master Not possible
Query Master IDN?;
Response WE WE2107,xxxxxxx,P7y crlf
Pyy is the program version number
Xxxxxxx is the serial number
18 chars. + end
label
Note: ( ) required parameters, < > optional parameters for parameter input
Function:
An identification string is output (18 characters + end label).
Sequence: electronics type, serial number, software version
A fixed number of characters are output. 6 characters are always output for the electronics
type, the serial number always has 7 characters and the version number always has three
characters (each separated by a comma).
Only the manufacturer can enter the serial number (any ASCII characters).
IDN