HBM WE2107 - Page 112

WE2107 - Communication commands
112
I1820-1.3 enHBM
P2 code Description (BFS)
0 No function
1 display sum of actual measured value (Gross, Net, Count, filling result )
for 5 sec.
2 counting scale ON / OFF
3 counting scale : input number of reference peaces and measure
refereence peaces
4 Print protocol PRT01…PRT06, defined in the parameter menu
Print\rsult\PRT
1)
5 display 10‐time resolution gross value, for 5 sec.
2)
6 Input of the manual tare value
7 Hold display value ON/OFF
8 display / enter target filling weight (portion weighing)
9 display filling result (portion weighing)
10 Start / Stop dosing (portion weighing)
11 Display / input on level of limit switch LIV1
12 Calculate total weight: SUM := SUM + Gross-value
13 Calculate total weight: SUM := SUM + NET-value
14 Calculate total weight: SUM := SUM + counting result
15 Manual tare function ON/OFF
1)
before the use of this function, the print protocol has to be selected in the parameter menu or by the comm. PRT.
2)
to display the 10‐times resolution the NOV < 10000 d, the DPT should be less than 4.