WE2107 - Communication commands
114
I1820-1.3 enHBM
P2 code Description (BFL)
0 No function
1 display sum of actual measured value (Gross, Net, Count ) for 5 sec.
2 counting scale ON / OFF
3 counting scale : input number of reference peaces and measure
reference peaces
4 Print protocol PRT01…PRT06, defined in the parameter menu
Print\result\PRT
1)
5 display 10‐time resolution gross value, for 5 sec.
2)
6 Input of the manual tare value
7 Hold display value ON/OFF
8 Display / enter target filling weight (portion weighing)
9 display filling result (portion weighing)
10 Start / Stop dosing (portion weighing)
11 Start / Stop filling tank
12 Start / Stop emptying tank
13 Clear total weight (SUM)
14 Manual tare function ON/OFF
15 ‐
1)
before the use of this function, the print protocol has to be selected in the parameter menu or by the comm. PRT.
2)
to display the 10‐times resolution the NOV < 10000 d, the DPT should be less than 4..
To Next Page
Loading...
