19
WE2107 - Communication commands
I1820-1.3 en HBM
Command PW LFT
Function
Page
MAL X Parameter menu access level 110
MFT X Maximum filling / dosing time 132
MRA X X Multi‐range switch point 1 48
MRB X X Multi‐range switch point 2 49
MIV? Data output (internal resolution for adjustment) 64
MSV? Data output 60
MDT X X Motion detection 47
NDS? Dosing counter 136
NOV X X Nominal output value 43
PES X Number of empty spaces in each row (printing) 100
PID X Print identification (counter) 101
PLB X Number of empty lines before printing values 99
PLE X Number of empty lines after printing values 103
PRT X Print protocol 97
PST X Printer strings 102
RES; Reset electronic 74
RFT Residual flow time (filling) 131
RSN X X Display resolution 45
RUN; Start dosing 129
S... Selecting electronic in bus mode (Select) 27
SFA X X Factory default curve full scale (nominal (rated)
value)
32
SFU X Scale function 126
SHC Start hard copy 104
SOV? Sensor overflow counter 82
SPW Write enable for all password‐protected para
meters
73
SZA X X Factory default curve zero point 31
SUM? Total weight 137
TAD Tare delay time (filling function) 130
TAR; Taring 67
TAS Gross / Net selection 70
TAV Tare value 68
TCR? Legal for trade counter 85
TDD Read/Save setting in EEPROM 76
TDL Delay time digital tilt input 117
TDT X Date (printing) 106
TME X Time (printing) 107
TMM X Time mode (printing) 108
ZSE X X Zero on start‐up 58
ZTR X X Automatic zero tracking 57
LFT Legal for trade parameters
PW Password protection via commands DPW/SPW
To Next Page
Loading...
