HBM WE2107 - Page 91

91
WE2107 - Communication commands
I1820-1.3 en HBM
P1=4, actual Gross or Net value :
Byte
Content
1 Start character (EDS) ,
if EDS=0 no start char. will send out
2 – 7 G/N value, 6 characters with decimal point
8 End character 1 (ED1) ,
if ED1=0 no char. will send out
9 End character 2 (ED2) ,
if ED2=0 no char. will send out
10 Check sum character (EDC) ,
if EDC=0 no char. will send out
P1=5, actual Gross or Net value :
Byte
Content
1 Start character (EDS) ,
if EDS=0 no start char. will send out
2 – 6 G/N value, 5 characters without decimal point
7 End character 1 (ED1) ,
if ED1=0 no char. will send out
8 End character 2 (ED2) ,
if ED2=0 no char. will send out
9 Check sum character (EDC) ,
if EDC=0 no char. will send out
Protocol 6 and 7 (as described above)
Character
1 2 3 4 5 6 7 8 9
Protocol 6 EDS VZ w w w w w w S1
Protocol 7 EDS VZ bo bo bo bo bo ED1 ED2
Character 10 11 12 13 14 15 16 17 18
Protocol 6 S2 S3 S4 unit1 unit2 unit3 ED1 ED2 EDC
Protocol 7 EDC
EDS Start character S1 G/N or Space
ED1 End character 1 S2 M (motion) or space
ED2 End character 2 S3 space
EDC Check sum S4 space or 1/2/3 for multi range
VZ sign
LZ space