Fig. 99: Editing a program segment
1 Program segment
Fig. 100: Editing a program segment
1. Tap on the program segment to be edited.
By tapping on the program segment to be edited, the
selected pr
ogram segment is highlighted in white in the pro-
gram segment list. All other program segments are shown in
grey.
2. Edit the program segment by tapping the
[Edit program seg-
ment]
button.
Item Designation Description/function
1
[Move the program segment to
the left]
button
With this button, you can move the currently selected pro-
gram segment to the left.
2
[Move the program segment to
the right]
button
With this button, you can move the currently selected pro-
gram segment to the right.
3 Program segment number Shows the designation of the program segment.
4
[Copy program segment]
button
‘Copying a program segment’
on page 79
With this button, you can duplicate the current program
segment with all settings. The duplicate is always
appended to the end of the program segment (right).
5
[Edit program segment]
button When this button is tapped, the program segment is
opened for editing (
Fig. 101 ‘Program segment settings’
on page 73
).
6
[Delete program segment]
button
‘Deleting a program segment’
on page 80
When this button is tapped, the currently selected program
segment is deleted. No conrmation dialogue will appear.
The calendar in the program settings only serves as
an aid for calculating the duration of the individual
program segments. If you create a program, for
example, which should last from Monday through
Friday, the start of the program is dened via the
start time in the start settings
‘Timer’
on page 86. If the program is started 24 hours later
(i.e. Tuesday), however, the end time is also shifted
by 24 hours.
To Next Page
Loading...
Need help?
General
