Device Security > Management Access > Server
Device Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
111
Operation
Configuration
Parameters Meaning
Operation Enables/disables the SSH server.
Possible values:
"Off"
The SSH server is disabled.
When you disable the SSH server, the existing connections remain
established. However, the device prevents new connections from
being set up.
"On" (default setting)
The SSH server is enabled.
The management functions of the device are accessible through the
Command Line Interface via an encrypted SSH connection.
The server can solely then be started if there is an RSA or DSA
signature on the device.
Note: If the Telnet server is disabled and you also disable SSH, the
access to the Command Line Interface is only possible through the V.24
interface of the device.
Parameters Meaning
TCP Port Specifies the number of the TCP port on which the device receives SSH
requests from clients.
Possible values:
1..65535
(default setting:
22
)
Exception: Port
2222
is reserved for internal functions.
The server restarts automatically after the port is changed. Existing
connections remain in place.
Session Count Displays how many SSH connections are currently established to the
device.
To Next Page
Loading...