Device Security > Management Access > Server
Device Security
112
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Fingerprint
The fingerprint is an easily verified hexadecimal number sequence that
uniquely identifies the RSA or DSA key (host key) of the SSH server.
After importing a new RSA or DSA key, the device continues to display
the existing fingerprint until you restart the server.
Max. Number of
Sessions
Specifies the maximum number of SSH connections to the device that can
be set up simultaneously.
If you access the device using CLI, SFTP or SCP, each of these
applications establishes a separate SSH connection to the device.
Possible values:
1..5
(default setting:
5
)
Session Timeout
[min]
Specifies the timeout in minutes. After the user logged on has been
inactive for this time, the ends the connection.
A change in the value takes effect the next time a user logs on to the
device.
Possible values:
0
Deactivates the function. The connection remains established in the
case of inactivity.
1..160
(default setting:
5
)
Parameters Meaning
DSA Number sequence of the public DSA key of the server.
RSA Number sequence of the public RSA key of the server.
Parameters Meaning
To Next Page
Loading...