Network Security > ACL > MAC Rule
Network Security
194
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Match Every Packet Specifies to which MAC data packets the device applies the rule.
Possible values:
marked
(default setting)
The device applies the rule to every MAC data packet.
The device ignores the value in the fields "Source MAC Address",
"Destination MAC Address", "Ethertype", "Ethertype Custom Value",
"VLAN ID", and "COS".
unmarked
The device applies the rule to MAC data packets depending on the
value in the fields "Source MAC Address", "Destination MAC
Address", "Ethertype", "Ethertype Custom Value", "VLAN ID", and
"COS".
Source MAC
Address
Specifies the source address of the MAC data packets to which the device
applies the rule.
Possible values:
??:??:??:??:??:??
(default setting)
The device applies the rule to MAC data packets with any source
address.
Valid MAC address
The device applies the rule to MAC data packets with the specified
source address.
You use the
?
character as a wild card.
Example
00:11:??:??:??:??
: The device applies the rule to MAC
data packets whose source address begins with
00:11
.
Valid MAC address/bit mask
The device applies the rule to MAC data packets with the specified
source address. The bit mask allows you to specify the address range
with bit-level accuracy.
Example
00:11:22:33:44:54/FF:FF:FF:FF:FF:FC
: The device
applies the rule to MAC data packets with a source address in the
range from
00:11:22:33:44:54
to
…:57
.
Parameters Meaning
To Next Page
Loading...