Network Security > ACL > MAC Rule
Network Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
197
Mirror Port Specifies the port on which the device transmits a copy of the MAC data
packets. The prerequisite is that you specify in the "Action" column the
value
permit
.
Possible values:
any
(default setting)
The device transmits a copy of the MAC data packets on every port.
<Port number>
The device transmits a copy of the MAC data packets on the specified
port.
The device does not provide the option of transmitting copies of MAC data
packets across VLAN boundaries or to routing interfaces.
Assigned Queue ID Specifies the ID of the priority queue on which the device transmits the
MAC data packets.
Possible values:
0..7
(default setting:
0
)
Logging Activates/deactivates the logging in the log file (system log).
Possible values:
marked
Logging is activated.
The device registers in the log file (system log), in an interval of 30 s,
how often it applied the deny rule to MAC data packets.
unmarked
(default setting)
Logging is deactivated.
Rate Limit Specifies the limit for the data transfer rate for the port specified in the
"Redirection Port" column. The limit applies to the summary of the data
sent and received.
This function limits the data stream on the port or in the VLAN:
Possible values:
0
(default setting)
No limitation of the data transfer rate.
1..4294967295
When the data transfer rate on the port exceeds the value specified,
the device discards surplus MAC data packets. The prerequisite is
that you specify in the "Burst Size" column a value >
0
. You specify the
measurement unit of the limit in the "Unit" column.
Unit Specifies the unit of measurement for the data transfer rate specified in the
"Rate Limit" column.
Possible values:
kbps
(default setting)
kByte per second
pps
Data packet per second
Parameters Meaning
To Next Page
Loading...