WAN > SHDSL/EFM > Statistics
WAN
274
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
Line attenuation
[dB]
Displays the current line attenuation in dB on the pair (determined by the
local device).
Possible values:
-127..128
65535
No connection has been established.
or
The connection is being initialized.
Line attenuation
Remote [dB]
Currently the device does not support this function.
Possible values:
65535
TC Coding Errors Displays the number of 64/65 octet encapsulation errors the device has
detected in the received data stream.
TC CRC Errors Displays the number of CRC errors the device has detected in the received
data stream.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...