Basic Settings > Load/Save
Basic Settings
48
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Table
Parameters Meaning
Storage Type Displays the storage location of the configuration profile.
Possible values:
RAM
(volatile memory of the device)
In the volatile memory, the device stores the settings for the current
operation.
NVM
(non-volatile memory of the device)
From the non-volatile memory, the device loads the Selected
configuration profile during a restart or when applying the function
"Undo Modifications of Configuration".
The non-volatile memory provides space for multiple configuration
profiles, depending on the number of settings saved in the
configuration profile.
The device manages a maximum of 20 configuration profiles in the
non-volatile memory.
If you highlight a configuration profile in the table and click "Activate",
the device loads this configuration profile into the volatile memory
(
RAM
).
ENVM
(external memory)
On the external memory, the device saves a backup copy of the
Selected configuration profile.
The prerequisite is that in the
Basic Settings > External Memory
dialog you mark the checkbox in the "Auto-save config on external
memory" column.
Name Displays the name of the configuration profile.
Possible values:
running-config
Name of the configuration profile in the volatile memory (
RAM
).
config
Name of the factory setting configuration profile in the non-volatile
memory (
NVM
).
User-defined name
The device allows you to save a configuration profile with a user-
defined name by highlighting an existing configuration profile in the
table and clicking the "Save As..." button.
Modification Date
(UTC)
Displays the time (UTC) at which a user last saved the configuration
profile.
To Next Page
Loading...