Basic Settings > Load/Save
Basic Settings
52
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Delete Removes the configuration profile highlighted in the table from the non-
volatile memory (
NVM
) or from the external memory.
If the configuration profile is designated as “Selected”, the device prevents
you from removing the configuration profile.
Select Designates the configuration profile highlighted in the table as “Selected”.
In the "Selected" column, the checkbox is then
marked
.
The device loads the settings of this configuration profile to the volatile
memory (
RAM
) during a restart or when applying the function "Undo
Modifications of Configuration".
Designate an unencrypted configuration profile solely as “Selected”
when the configuration encryption in the device is disabled.
Designate an encrypted configuration profile solely as “Selected”
when the following prerequisites are fulfilled:
– The configuration encryption in the device is enabled.
– The password of the configuration profile matches the password
saved in the device.
Otherwise, the device is unable to load and encrypt the settings in the
configuration profile the next time it restarts. For this case you specify in
the
Diagnostics > System > Selftest
dialog whether the device starts
with the default settings or terminates the restart and stops.
Note: You solely mark configuration profiles saved in the non-volatile
memory (
NVM
).
If in the
Basic Settings > External Memory
dialog the checkbox in the
"Auto-save config on external memory" column is marked, the device
designates the configuration profile of the same name on the external
memory as “Selected”.
Button Meaning
To Next Page
Loading...