Basic Settings > Load/Save
Basic Settings
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
51
Save Transfers the settings from the volatile memory (
RAM
) into the
configuration profile designated as “Selected” in the non-volatile memory
(
NVM
).
If in the
Basic Settings > External Memory
dialog the checkbox in the
"Auto-save config on external memory" column is
marked
, the device
generates a copy of the configuration profile on the external memory.
Note: If you intend to downgrade to the software version HiSecOS 1.1.xx,
note the following information:
Using an up-to-date software version, the device saves the settings in a
compressed configuration profile. When booting with the above
mentioned software version, the device is able to read uncompressed
configuration profiles exclusively. If upon booting solely a compressed
configuration profile is available, the device boots applying the delivery
settings. The settings in the compressed configuration profile are then
lost.
To save the configuration profile which is compatible with the software
version mentioned above, you proceed as follows:
Before downgrading
Click the and "Export..." buttons to export the configuration
profile as an unencrypted XML file.
After downgrading
Click the and "Import..." buttons to import the configuration
profile.
Activate Loads the settings of the configuration profile highlighted in the table to the
volatile memory (
RAM
).
The device terminates the connection to the graphical user interface.
Reload the graphical user interface.
Login again.
The device immediately uses the settings of the configuration profile
on the fly.
Enable the function "Undo Modifications of Configuration" before you
activate another configuration profile. If the connection is lost afterwards,
the device loads the last configuration profile designated as “Selected”
from the non-volatile memory (
NVM
). The device can then be accessed
again.
If the configuration encryption is inactive, the device loads the
configuration profile if it is unencrypted. If the configuration encryption is
active, the device loads the configuration profile if it is encrypted and the
password matches the password stored in the device.
When you activate an older configuration profile, the device takes over the
settings of the functions contained in this software version. The device
sets the settings of new functions to the default value.
Button Meaning
To Next Page
Loading...