Device Security > User Management
Device Security
82
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Table
Every user requires an active user account to gain access to the
management functions of the device. The table allows you to set up and
manage user accounts.
To change settings, click the desired parameter in the table and modify
the value.
Parameters Meaning
User Name Displays the name of the user account.
To create a new user account, click the "Create" button.
Active Activates/deactivates the user account.
Possible values:
marked
The user account is active. The device accepts the login of a user with
this user name.
unmarked
(default setting)
The user account is inactive. The device rejects the login of a user with
this user name.
When one user account exists with the
administrator
access role, this
user account is always active.
Password Displays ***** (asterisks) instead of the password with which the user logs
in. To change the password, click the relevant field.
Possible values:
Alphanumeric ASCII character string with 6..64 characters
The following characters are allowed:
–
a..z
–
A..Z
–
0..9
–
#$%&'()*+,-./:;<=>?@_`
The minimum length of the password is specified in the "Configuration"
frame. The device differentiates between upper and lower case.
If you mark the checkbox in the "Policy Check" field, the device checks the
password according to the policy specified in the "Password Policy" frame.
The device always checks the minimum length of the password, even if
the checkbox in the "Policy Check" field is
unmarked
.
To Next Page
Loading...